Carrier Access Access Navigator Text Conventions, SystemID set ds1 42 framing esf, Set ds1 1-4 up

CLI Language Reference

Text Conventions

￿￿Errors in a command will produce an error message. The CLI will also mark the location of the first error found in the command with the ^ symbol, as in the following example.

SystemID> set ds1 42 framing esf

*-----------------^

*-Number out of range: must be 1..32 SystemID>

Text Conventions

Procedures in this manual use the following conventions to represent input commands and output messages.

NOTE: Online help does not display characters in bold or italic.

￿￿Input commands appear in a bold typewriter font, as in the following example.

set ds1 1-4 up

￿￿If a command requires the operator to enter information, an italic typewriter font is used to show what item or items are required. Each item will be enclosed in < and > symbols, as in the following example. Do not type the < > symbols.

set ds1 <n> <setting>

￿￿If the operator must enter one item from a list, the items will be separated by vertical lines, as in the following example. Do not type the < > symbols.

set ds1 <n> <updown>

￿￿System output messages to the operator are printed in normal typewriter font, as in the following response to show the settings for DS1 number 13.

show ds1 13

Settings for DS1 13:	AcmeCorp
Circuit ID:
Up/Down:	UP
Framing:	ESF
Line Coding:	B8ZS

Access Navigator - Release 1.8 August 2003 18-7