Carrier Access Access Navigator user manual Set ds1 n framing d4esf

Provision Remote Adit 600 via IP DS0

Provision Drop DS1s to Remote Adit

3.Set DS1 out of service with the following command: set ds1 <n> down

Example:	set ds1	1 down
Example:	set ds1	10-15 down

4. Set DS1 type to “drop”

set ds1 <n> type drop

Example: set ds1 1 type drop

5.Set DS1 framing to ESF or D4 (SF). Use ESF for Carrier Access FDL management or D4 for IP DS0 management.

set ds1 <n> framing <d4esf>

Example: set ds1 1 framing esf

6. Set DS1 line code

set ds1 <n> linecode <amib8zs>

Example: set ds1 1 linecode esf

7.Set drop DS1 clock source to normal or loop set ds1 <n> clock <normalloop>

Example: set ds1 10 clock normal

8.Set DS1 remote device management type to use Carrier Access IP management (CAIP) using the IP address of the remote device being managed.

set ds1 <n> remote device management caip <ipaddr> [pphone]

Example: set ds1 1 remote device management caip 192.168.3.158

Include pphone option to enable P-Phone service to the remote Adit 600. Do not use this option unless P-Phone service is required.

9.Set all other drop DS1s to same remote Adit to point to DS1 using CAIP. set ds1 <n> remote device mgmt ds1 <n>

Example: set ds1 2 remote device management ds1 1

13-16 August 2003 Access Navigator - Release 1.8