Panasonic VDR-M70GC When using brand-new DVD-R disc, When recording on this DVD Video Camera

Note:

•Disc cannot be inserted or removed unless the battery or AC adaptor/charger is connected to DVD Video Camera.

•See page 70 for how to set disc in Round DVD Holder.

•If there is some delay before recording starts, refer to page 143.

•The disc insertion orientation is predetermined: Forcibly inserting a disc in wrong orientation could damage the DVD Video Camera or Round DVD Holder of disc.

•If the disc is not correctly inserted, the cover will not close. Never try to forcibly close the cover: This could cause damage. Reinsert the disc properly.

•If a single-sided disc is inserted into DVD Video Camera with the printed label facing the inside, an error message will appear. Remove the disc and reinsert it with its recording/playback side facing the inside. See “Trouble Messages” on page 145.

•When using double-sided disc

Recording is possible on both sides of double-sided disc. However, when recording or playback on one side is finished, recording or playback will not move automatically to the other side. Remove the disc once from the DVD Video Camera, turn over the disc in Round DVD Holder and insert it again for continued use.

●When using brand-new DVD-R disc

Recognition of the disc will
	F o rma t	D i s c
start.
The messages on the right	T h i s d i s c m u s t b e f o r m a t t e d
	b e f o r e i t c a n b e u s e d b y
will appear in sequence by
	t h i s	c a m e r a .
pressing the Abutton	NEXT	CANCEL
between messages.

When recording on this
DVD Video Camera:
When first message “Format
	F o rma t	D i s c
the disc now?” appears,	D o n o t f o r m a t		t h i s	d i s c
choose “YES” and then	i f y o u w a n t t o r e c o r d f r o m
	t h e PC connec t i on			t e r m i n a l .
press the Abutton. The
disc will be automatically
	NEXT	CANCEL
formatted.
When formatting is
complete, “DVD-R disc,
Video mode cannot be
	F o rma t	D i s c
changed” will appear (See
page 149): Press the A	F o r m a t t h e		d i s c n o w ?
button to erase the
message.		YES	NO
	ENTER
Once formatted, a DVD-R
disc can no longer be

changed to a disc for PC, even if it has not been recorded on this DVD Video Camera.

Note:

See page 81 for movie quality mode.

When recording data from PC:

While the above messages are being displayed, press the Cbutton, or when message “Format the disc now?” appears, choose “NO” and then press the Abutton.

However, if data from PC has not yet been recorded, the disc can be made usable on this DVD Video Camera. When inserting the disc into this DVD Video Camera, the same message will appear: If you wish to use it on this DVD Video Camera, choose “YES”.

Note:

Do not initialise a disc on which you wish to record data created using the application (MyDVD) of PC.

English

VQT0K98

45

213