Panasonic VDR-M70GC user service 148

	Message		Cause & Troubleshooting	Reference
				page
	DISC ACCESS	The recorded scene is being stored on disc.
		Wait until the message disappears, and you can start to use the		49, 50
		DVD Video Camera.
		This DVD Video Camera is verifying whether the correct disc has
		been inserted.
		Wait until the message disappears, and you can start to use the		
		DVD Video Camera.
		This message will be displayed for a little longer when the date
		changes.
	DISC ALMOST FULL	The disc will soon be full, and recording will be impossible.
English		Delete unnecessary scenes and try the disc again, or use another		30, 31, 96
		disc.
	Disc error has occurred.	•	Disc error occurred during finalising, and finalising failed.
	Finalising is not		Replace the disc.	123
	complete.	•	See *3 on 152.
	Disc error has occurred.	• Has the disc been initialised on PC? Has initialising the disc on
	Format the disc now?		PC been interrupted?
			Choose “YES” and initialise the disc when using it on this DVD	121
			Video Camera. initialising the disc will erase all data on it.
		•	See *2 on page 152.
	Disc error has occurred.	The disc may be dirty.
	Formatting is not	Remove the disc and wipe off fingerprints, dust, etc. before reusing
	complete.	it, or use another disc.		70, 121
		This message may also appear if you insert a disc for which
		formatting was interrupted midway. In this case, use another disc.
	Disc error has occurred.	Disc error could have occurred during editing of scenes.
	Keep disc inside &	Turn off the DVD Video Camera with the disc being used in it,		43
	restart.	connect AC adaptor/charger, and then power the DVD Video
		Camera again. Repair of scenes will be tried.
	Disc error.	•	Use another disc.	26, 70
		•	See *3 on page 152.
		•	Mismatch in recording information may be caused by editing
			done on some device other than this DVD Video Camera.	121
			initialise the disc or use another disc.
		•	initialising the disc will erase all data on it.

VQT0K98

148

316