Inserting Battery into Remote Control

Insert the provided lithium battery into remote control.

1 Slide the cover to remove it.

2 Insert the lithium battery with the positive R terminal facing up.

3 Slide the cover to close it.

Note:

The life of lithium battery is approximately one year. If the battery is discharged, no operation is possible with remote control: Replace the battery.

English

Battery stopper

 

Removing Battery from Remote Control

1 While pushing the battery stopper, slide the battery out.

While pushing battery stopper

Battery stopper

Warning:

KEEP THE BATTERY AWAY FROM CHILDREN AND PETS.

IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.

BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT RECHARGE, DISASSEMBLE OR DISPOSE OF IN FIRE.

Note:

Replace the battery with a Panasonic CR2025. Use of another battery may present a risk of fire or explosion.

Dispose of battery safely in accordance with local laws. Do not dispose of in fire.

Do not short circuit the battery.

Do not hold the battery with the metallic tweezers.

Keep the battery in a dark, cool, dry place.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer’s instructions.

WARNING

Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 100°C or incinerate. Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed call your doctor.

VQT0K98

34

202

Page 33
Image 33
Panasonic VDR-M70GC user service Inserting Battery into Remote Control, Removing Battery from Remote Control