Panasonic VDR-M70GC user service Trouble Messages, 145, Message Cause & Troubleshooting Reference

Trouble Messages

A message may appear while you are operating the DVD Video Camera. If a message appears, refer to the following table and take appropriate corrective action.

Message		Cause & Troubleshooting	Reference
			page
(1) Data error in a part of	It is possible that the system cannot normally complete writing of file
image file. Repair data	when power is turned off for some reason during recording or
now?	editing (deleting, dividing or combining scenes, or creating play list).
(2) Found error in image	Selecting “YES” will automatically repair the video file, but even if
file. Repair data now?	“NO” is selected, the same message will appear when the DVD
(3) Data error in all	Video Camera is turned on next time. (Do not remove the disc while			English
image file. Repair all	the DVD Video Camera is recognising it: Ignoring this will deactivate
data now?	the file repair function.)
	Follow the instructions on screen, taking note of the following
	cautions:
	• Data may not be repaired, depending on the timing when power
		was turned off.	
	•	Data may not be repaired normally if data recorded on another
		recorder is mixed in.
	•	The repaired data may be different from the original recorded
		content because of partial deletion of defective portion.
	• Since the date/time for repair is added to the repaired data (only
		the corrected portion for partial repair), the original date/time
		information will be lost.
	•	Since all movies, and then all stills, are repaired, the order of
		recorded contents will be lost.
		(In case of message (2) (3) only)
	•	See *1 on page 152.
(1) Error has occurred.	• Error has occurred. Try to restart the DVD Video Camera using
Please restart.		the following methods:
		(1) Turn power off, remove the battery or AC adaptor/charger and
(2) Error has occurred.
		reattach it, and then turn power on again.
Please reinsert a disc.
		(2) Turn power off, and reinsert the disc. Then turn power on
(3) Error has occurred.
		again.
Error code No. xxxx.		(3) See *3 on page 152.	6, 40, 43, 44
Please read the manual.		(4) If you have another disc available, check to see if any problem
		occurs with the disc. If another disc can be used normally, the
(4) ERROR xxxx
		original disc may be defective: Contact the disc manufacturer.
		If the above procedures cannot solve the problem, take note
		of the error number, and contact your dealer.
		Reference: “Error Code 2881” shows that the disc cannot be
		recognized properly.

VQT0K98

145

313