Panasonic VDR-M70GC user service Start recording P Open the LCD monitor See

3 Start recording (P. 49).

1.Open the LCD monitor (See page 36).

2.While holding the switch at the centre of power switch, set the switch to “ ” or “ ”.

3.Set the LOCK switch to (to the left) to prevent accidental switching of recording mode.*

* Only in mode.

4.Press the REC button. Recording will start.

Pressing the REC button again will stop recording.

English

REC button

Note:

When using an unformatted disc, format (initialise) it on this DVD Video Camera.

If unformatted disc is inserted into this DVD Video Camera, a message will appear: Format the disc following the

instructions on screen (P. 45, 121). Initialising the disc will erase all the recorded contents: Make sure the contents on disc are not valuable before initialising the disc.

4 View the playback of recorded content on LCD monitor screen.

1.Open the LCD monitor (See page 36). 3.Press the Cbutton to stop playback.

2.After recording is finished, press the A button.

The recorded scene will be played back.

VQT0K98

23

191