Panasonic VDR-M70GC user service Inserting and Removing Disc, Inserting Disc, Single sided disc

Inserting and Removing Disc

English

Inserting Disc

1 Press down the DISC EJECT button once and release it.

A few moments after the ACCESS/PC indicator blinks, the cover of disc insertion block will open slightly.

2 Gently open the cover by hand until it stops.

3 Insert the disc, in Round DVD Holder, into the disc guide until it stops.

Note that the recording/playback surface of disc must face the inside of DVD Video Camera. The orientation for inserting the disc into the disc guide is also predetermined: Load the disc correctly, referring to the figure below.

If the disc is not correctly inserted, the cover will not close. Never try to forcibly close the cover: This could cause damage. Reinsert the disc properly.

Correct orientation

Incorrect orientation

	PUSH CLOSE
	portion
	Disc cover
DISC EJECT	Disc guide
lever

• The disc exposed portion must face in the same direction

as the lens, as shown in figure.

4 Push the section marked “PUSH CLOSE” on the cover of disc insertion block, to close the cover.

5 Turn the DVD Video Camera on ( or ).

When “DISC ACCESS” disappears, the DVD Video Camera is ready for recording.

●Identifying recording/playback sides of disc:

• The recording/playback side must face the inside (DVD

Video Camera).

Single sided disc:

The recording/playback side is opposite to the printed label.

Double-sided disc:

The recording/playback side of “SIDE A” is opposite to the “SIDE A” marked side.

The recording/playback side of “SIDE B” is the “SIDE A” marked side.

“SIDE A” mark

The opposite side is the “SIDE A” recording/playback side.

VQT0K98

44

212