Panasonic VDR-M70GC user service 150

	Message		Cause & Troubleshooting	Reference
				page
	Finalise may not be	Instantaneous shutoff occurred during finalising, after which power
	complete. Finalise again	was supplied and disc was inserted.		123
	now?
	It is unrecordable on this	The inserted card cannot be used in this DVD Video Camera: Use		29
	card.	another card.
	JPEG file related to	This message will appear when stills recorded on DVD-RAM disc
	scenes are not found.	using a device other than this DVD Video Camera are to be copied		
		to card.
	No card.	Insert a card.		47
English	No card.	No card is inserted.		47
	Please insert card.	Insert a card.
	NO DISC	This message may appear when the DVD Video Camera or disc is
		moved from a cold place to a warm place.
		Condensation has occurred on the video camera lens or DVD-RAM		6
		drive. Do not remove the disc; leave the DVD Video Camera turned
		off in a place as dry as possible for 1-2 hours.
		The disc has not been inserted.		44
		Insert it.
	No more scenes. Play	•	All scenes are deleted from the play list.
	List was deleted.	•	Since a play list with no scenes cannot be supported by	115, 116
			specifications, a play list from which all registered scenes have
			been deselected will be deleted.
	Photo cannot be	Still image cannot be divided.		102
	divided.
	PlayLists over limit.	An attempt was made to create new play list or copy play list, even
		though limit specified for play lists in the video recording standard		111
		had already been stored.
	Same scenes on Play	•	This will appear when scenes are to be deleted.
	List will be deleted.	•	When a play list exists on disc, an attempt to delete scenes in	96
	Delete scenes?		program will display this message (This message will not appear
			if you deselect scenes from play list.).
	Scenes over limit.	The number of scenes entered in play list has reached the limit that
	Cannot add scenes.	can be entered.		111, 116
		Delete several scenes.
	Scenes over limit.	The number of entered scenes has reached the limit that can be
	Cannot divide scene.	entered.		102, 111
		Delete several scenes.
	Scenes over limit.	This message will appear if you try to move a scene when the		99, 111
	Cannot move scene.	number of scenes has already reached the registrable limit.

VQT0K98

150

318