Panasonic VDR-M70GC user service Playing Back, Before You Begin, Turn the DVD Video Camera on P

Playing Back

Before You Begin	•	Insert a disc or card recorded on this DVD Video Camera (P. 44, 47).
	•	Turn the DVD Video Camera on (P. 48).

Playing Back

1 Press Abutton in the recording pause status.

The DVD Video Camera will enter the playback mode, and the scene you have recorded last will be played back.

When playback is finished, the DVD Video Camera will enter the pause status at the last image on disc.

If the playback pause status continues for as long as 5 minutes, the DVD Video Camera will automatically return to the recording pause status.

2 Press the Cbutton.

Playback will stop, and recording pause status will be restored.

123

Note:

•During playback of movie, playback sound will be heard

from the speaker. Adjust the sound volume using the volume control buttons (S, R).

•You can play back the audio recorded in Dolby AC 3 (2ch).

•To temporarily stop playback, press the Abutton. Press the Abutton again to restart playback.

•Even if you stop playback midway and immediately start recording again, the new image will be recorded after the last scene on disc or card (the previous images will not be overwritten).

•Image data edited on PC or certain types of image data may not appear on this DVD Video Camera.

•Image data recorded on another camcorder may not be playable on this DVD Video Camera.

•Depending on the amount of data to be played back, it may take some time for the playback image to appear.

•Do not operate the power switch or remove the card while the ACCESS/PC or CARD ACCESS indicator is lit or blinking: Doing so may damage the card or the data on card.

English

VQT0K98

57

225