Panasonic VDR-M70GC user service 129, Installing USB Driver, USB Driver Installation button

Installing USB Driver

Use the following procedure to install the USB Driver. The following instructions is the example for using the disc. It is necessary to repeat the step 6-9 procedure for using the card (Select “ “ in step 6).

1 Insert the provided CD-ROM into the PC, and		5 Click “Quit”.
Click “USB Driver” on the “Setup Menu” screen.
If the “Setup Menu” screen will not appear,
double-click the CD-ROM drive icon.
2 The driver setup screen will appear: Click the
			Click
“USB Driver Installation” button.
		6 Set the power switch of DVD Video Camera to
		“ ”, and then use the provided USB cable to
		connect the DVD Video Camera to the USB port
		of PC.
		The “Found New Hardware” icon will appear.
	Click

English

3 When using Windows® XP Home Edition/XP Professional, click “OK”: A message will appear, read the message, and then click “OK”.

When using OS other than Windows® XP Home Edition/XP Professional, skip this step.

Click

4 When using Windows® XP Home Edition/XP Professional, click “Continue Anyway”.

When using OS other than Windows® XP Home Edition/XP Professional, skip this step.

When using OS other than Windows® XP Home Edition/XP Professional, installation of the USB Driver is completed. If any message will appear, follow instructions on screen.

When using Windows® XP Home Edition/XP Professional, proceed to the next step.

7 When the “Found New Hardware Wizard” screen appears, make sure that “Install the software automatically (Recommended)” has been checked, and then click “Next”.

CheckClick

Click

VQT0K98

129

297