Panasonic VDR-M70GC user service 157, When the DVD Video Camera is connected to PC

When the DVD Video Camera is connected to PC:

Symptom				Cause and Correction	Reference
					page
No drive icon appears on	The DVD Video Camera is not turned on.				48
PC.	Check the power supply.
	Driver is not properly recognised.
	Turn PC off and on again. If the drive icon still does not appear, use				
	“Refresh driver” in Device Manager to reinstall the driver.
	Turn PC off and then disconnect the USB cable. Turn PC on again,
	and then use the USB cable to connect the DVD Video Camera to				
	PC.
	Make sure the USB cable is completely plugged into this DVD Video				
	Camera.
	If a yellow “!” mark is attached to some device in Windows® Device
	Manager, uninstall the USB device driver, and then reinstall it,				
	following the procedure on page 129.
Error occurs in playback	If error occurs with USB connection, the transfer rate is not sufficient.
of DVD Video Camera on	It is recommended that you use a USB port conforming to				
PC.	USB2.0 when connecting the DVD Video Camera.
Application is not	Turn the PC and DVD Video Camera off, and try again.				
normally run on PC.
Error occurs during	The temperature of DVD Video Camera is too high due to continuous
writing to DVD-R disc.	operation.
	Disconnect the DVD Video Camera from PC once, remove the disc				
	from the DVD Video Camera, and then turn it off. After a few
	moments, connect them again and write to a brand-new disc.
Transfer of images stops.	Connect the DVD Video Camera to another USB terminal of PC. If
	your PC is a desktop type, it is recommended that you use USB				
	terminal on the back of PC.
DVD-RAM/R/RW drive	This problem may be solved if the software related to DVD-RAM/R/
built into PC cannot be	RW of your PC is upgraded, or if the DVD-RAM Driver is uninstalled.
used after the provided	However, with Windows® 98 Second Edition / Me / 2000				
software has been	Professional, uninstalling the DVD-RAM Driver will make it
installed.	impossible for the JPEG stills recorded on DVD-RAM of this DVD
	Video Camera to be read by the PC.
DVD-R disc cannot be	DVD-MovieAlbumSE does not support playback or data read on
played back on DVD-	DVD-R disc: Use generally available DVD video playback software				134
MovieAlbumSE.	to play back DVD-R disc on PC.
Error appears when	Make sure that your PC display adaptor (video card) conforms to
starting DVD-	DirectX 8.1.				
MovieAlbumSE.
Video written to hard disk	DVD-MovieAlbumSE cannot edit DVD-VR data stored on hard disk
of PC cannot be edited	of PC: Copy the data to another DVD-RAM disc and then edit it.				
on DVD-MovieAlbum
copy tool.
Movies are not	Make sure the power switch of this DVD Video Camera is set to
recognised by	“	”, “	” or “	”.	
application in PC.

English

VQT0K98

157

325