Setups

This section explains preparations for recording - setting up the DVD Video Camera and battery.

Setting Up the DVD Video Camera

English

Holding DVD Video Camera

To use as a Grip Belt

Insert your right hand from the bottom of DVD Video Camera up to the base of your thumb.

Put your hand in a position where you can easily operate the REC button and the Zoom lever. Adjust the length of hand strap so that the DVD Video Camera is stable when you press the REC button with your thumb.

1)Detach the belt.

2)Adjust the length of grip belt.

3)Attach the belt.

Note:

Do not adjust the hand strap while holding the DVD Video Camera: Doing this could cause the DVD Video Camera to fall and be damaged.

To use as a Hand Strap

Using the Grip Belt as the hand strap makes it easier to carry the DVD Video Camera.

1 Detach the Grip Belt from the Video Camera.

2) Push the Lock button and pull the grip belt

1) Open the Lock cover.

from the DVD Video Camera.

 

Support the DVD Video Camera securely by

 

the hand to avoid falling.

Lock cover

 

 

Lock button

 

Lock cover

Open the lock cover while pinching the protection portion of both ends.

2 Make it a hand strap.

1)Turn over the belt.

2)Pull the tip in the direction of the

arrow.

3) Attach the belt.

Return the lock cover after pulling out the grip belt.

VQT0K98

32

200

Page 31
Image 31
Panasonic VDR-M70GC user service Setting Up the DVD Video Camera, Holding DVD Video Camera, To use as a Grip Belt