Panasonic VDR-M70GC user service Using the Image Stabiliser SIS, Checking SIS On or Off

Using the Image Stabiliser (SIS)

When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image.

1 Press the MENU button, choose “SIS” on the “Camera Functions Setup” menu screen, and then press the A button.

Came r a	Func t i ons	Set u p
P r og r am AE
Wh i t e Ba l .
S I S		On
D i g . Zoom		Of f
Wi n d Cu t
C i n e m a
ENTER	RETURN	RAM

After recording with SIS set to “Off”, it is recommended that you return the setting to “On” and then turn the DVD Video Camera off, unless you normally record with “Off” setting.

This function is effective only during movie recording: It will not work during still recording.

2 Choose the “On” or “Off”, and then press the A button.

3 Press the MENU button to end the setting.

●Checking SIS On or Off

You can check SIS On or Off by the on-screen information display.

		0	: 0 0 : 0 0
SIS		REM 3 0 MIN
	FINE		8 : 0 0 AM
		S E P	3 0 2 00 4

Note:

•The SIS setting will be stored in memory even when the DVD Video Camera is turned off.

•Although you can switch SIS between on and off during still recording, the setting will be effective only during movie recording.

•It is recommended that you specify “SIS Off” when using the DVD Video Camera on a desk or tripod.

•When “SIS On” is specified, there will be a slight difference between the actual movement and the movement on screen.

•Gross camera shake may not be entirely corrected even if “SIS On” is specified.

•SIS may not operate correctly when the tele or wide- conversion lens (generally available) is used.

•When you record pictures with setting 10x or more of magnification and turning the SIS to “On” in dim places, after-images may stand out. In this case, we recommend using a tripod with turning the SIS to “Off” (only for VDR- M50GC).

•The SIS function cannot be used when still images are recorded on the card (only for VDR-M70GC).

English

Reducing Wind Noise during Recording (Wind Cut)

When recording sound from the microphone built into this DVD Video Camera, you can reduce wind noise in recording.

If “Wind Cut: ON” is specified, the low-frequency components in the sound picked up by microphone will

be cut off during recording: This makes it easier to hear the target voice or sound during playback.

1 Press the MENU button, choose “Wind Cut” on the “Camera Functions Setup” menu screen, and then press the A button.

Camer a	Func t i ons	Setup
P r og r am AE
Wh i t e Ba l .
S I S
D i g . Zoom
Wi n d Cu t		On
C i n e m a		Of f
ENTER	RETURN	RAM

Note:

• You can also use the on-screen display to confirm that

the Wind Cut has been set.

• The Wind Cut setting will be stored in memory even when

the DVD Video Camera is turned off.

• The Wind Cut function will work only during movie

recording.

•

2 Choose “On”, and then press the Abutton.

3 Press the MENU button to

end the setting. 0 : 0 0 : 0 0

REM 3 0 MIN

The Wind Cut function works only with the built-in

microphone: It will not function when using an external

microphone (P. 65).

FINE

8 : 0 0AM S E P 3 0 2 0 0 4

Wind Cut icon

VQT0K98

79

247