Panasonic VDR-M70GC user service Recording Stills

13

Recording Stills

English

Note:

Recording of still images is possible on DVD-RAM disc and card.

ACCESS/PC	CARD
indicator	ACCESS
	indicator

REC button

Power switch

1 Turn the DVD Video Camera on.

When using DVD-RAM disc:

Set the power switch to “ ”.

When using card:

Set the power switch to “ ”.

After the ACCESS indicator goes out, perform the subsequent operation:

2 Check the subject on the screen (viewfinder or LCD).

3 Press the REC button.

The DVD Video Camera automatically focuses on the subject at the centre of screen (when auto focus is selected).

The screen will be black, and then the recorded still will be displayed. When the “m” mark appears, you can proceed with the next recording; while “DISC ACCESS” or “CARD ACCESS” is being displayed, you cannot proceed with the next recording.

4 Set the power switch to “OFF” to turn the DVD Video Camera off.

Turn power off only after message “DISC ACCESS” disappears.

Note:

•See “Size and Quality of Photos” on page 31 for details of stills on card.

•See “Check 2” on page 143 if recording photos is not possible.

•Do not operate the power switch or remove the card while the ACCCSS/PC or CARD ACCESS indicator is lit or blinking: Doing so may damage the card or the data on card.

•With VDR-M70GC, the range of screen in which recording is possible will be different for movie and still.

•The DVD Video Camera automatically sets the shutter speed between 1/800 and 1/30 second (between 1/800 and 1/10 second if Program AE has been set to Low Light) depending on the subject brightness.

VQT0K98

50

218