Dynacord Speaker manual Subwoofer

SUB 112

Sub 112

SUBWOOFER

The DYNACORD Sub 112 is a vented, direct-radiating cabinet equipped with a high-power DYNACORD DND12S400 neodymium woofer boasting power handling of 400 W (rated) and 1600 W (peak).

The conical vent system results in less flow loss and lower air noise than conventional vented designs. High sound pressure levels are also generated at low frequencies with significantly less distortion than by conventional bass reflex vents. The Sub 112 contains a passive low-pass filter with a slope

of 6 dB / octave. The Sub 112 can therefore be used directly in parallel to appropriate full-range cabinets, e.g. the DYNACORD D 8, if extended bass reproduction is required.

The Sub 112 cabinet is composed of birch plywood 15 mm-thick.

All corner joints and braces are grooved and glued. The cabinet‘s surface is painted with a robust, dual component lacquer finish. The acoustic foam and powder coated steel grille at the front protect the DND12S400 woofer from harm during transportation

and against the depredations of inclement weather. The connection panel offers two 4-pin Speakon sockets (INPUT / THRU) for a more secure connection and the easy daisy- chaining of cabinets. A threaded pole adapter is recessed in the top of the Sub 112 cabinet for the swift and safe pole-mounting of suitable full-range cabinets. The cabinet is equipped with four large rubber feet for greater stability. Two handles on the side make it possible to carry the device easily and safely.

Ahard-wearing protective cover is available as an optional accessory.

31