Klark Teknik DN9610 user manual Technical Specifications, Troubleshooting, Service Information

6. Technical Specifications

©2012 MUSIC Group IP Ltd. Technical specifi cations and appearances are subject to change without notice and accuracy is not guaranteed. MIDAS and KLARK TEKNIK are part of the MUSIC Group (music-group.com).

DN9610 general specifications
	Dimensions	Length = 141 mm (5.6”)
		Depth = 104 mm (4.2”)
		Height = 60 mm (2.35”)
	Net weight	0.77 kg
	Shipping weight (gross)	Single unit = 1.10 kg
		10 units = 12.00 kg
	Power requirements	Voltage = +9V to +18V DC
	Power consumption	83mA single channel
		166mA both channels
	Operating temperature range	+5° C to +40° C
	Storage temperature range	-20° C to +60° C

7. Troubleshooting

If blue power LED is extinguished when power is being applied to the unit, this indicates either a problem with the power adaptor or an internal problem with the unit. If power adaptor is OK, the unit may be faulty. Please see the LIMITED WARRANTY information at the front of the manual.

8. Service Information

This section gives you servicing information for your unit.

If you are in any doubt or have queries about any of the procedures in this section, contact Klark Teknik Technical Support. Contact details can be found at the front of this manual.

8.1 Routine maintenance

To help keep your unit in good working order and to make sure it gives you optimum performance, we recommend that you carry out the following every month.

•Clean the unit using a dry, lint-free cloth. Don’t use harsh abrasives or solvents.

•Check the functionality of the LEDs.

•Check the functionality of the equipment.

User Manual 11

8.2 Equipment disposal

When this equipment has come to the end of its useful life, its disposal may come under the DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Hazardous substances in WEEE contaminate water, soil and air and ultimately put at risk our environment and health. The directive aims to minimize the impacts of WEEE on the environment during their life times and when they become waste.

The WEEE directive addresses the disposal of products when they have reached the end of their life and contributes to the reduction of wasteful consumption of natural resources. This will help to reduce pollution, and protect the environment and ourselves.

If this equipment carries a ‘crossed-out wheelie bin’ (shown left), please do not dispose of WEEE as unsorted municipal waste but collect and dispose of in accordance with local WEEE legislation. The horizontal bar underneath indicates that the product was placed on the EU market after 13th August 2005.

For WEEE disposal, see our website at klarkteknik.com for information.

klarkteknik.com