Troubleshooting

Diagnosing Switch Indicators

Symptom

Power LED does not light after power on.

Probable Causes

DC power adapter may be defective.

Possible Solutions

Check for loose connections.

Check the power outlet by using it for another device.

Replace the DC power adapter.

Symptom

Port (link) LED does not light after connection is made.

Probable Causes

Switch port, network card, or cable may be defective.

Possible Solutions

Check that the Switch and attached device are both powered on.

Be sure the network cable is connected to both devices.

Verify that Category 5 or better cable is used for 10/100Mbps connections; Category 5, 5e, or 6 cable for 1000Mbps connections; and that the length of any cable does not exceed 328 feet (100m).

Check the network card and cable connections for defects.

Replace the defective card or cable if necessary.

1

2

3

4

5

6

7

8

section

11

Page 14
Image 14
Belkin F5D5141-5 manual Troubleshooting, Diagnosing Switch Indicators