Sources
Use this option to turn the AM or VHF tuner source on or off, if required. This
is useful if you only listen to FM and do not wish to step through AM and VHF when selecting a tuner source.
To enable or disable the AM of VHF tuner sources:
1.Press the Menu key.
2.Turn and then press the Encoder to select the Settings > Sources.
3.If required, press the Encoder to enable the AM source ( 
) or disable
the AM source ( 
).
4.If required, turn the Encoder to select VHF then, press the Encoder to
enable the VHF source ( 
) or disable the VHF source ( 
).
5.Press any key to exit.
Factory Reset
The factory reset function will return all settings in the 700 Series to the factory default value.
Warning: All AM, FM and VHF station presents are erased. Tuner and VHF tuner regions are reset to USA. All zones are enabled and zone settings, tone, subwoofer filter settings, source settings and device name are returned to default values.
To reset your 700 Series to factory default values:
1.Press the Menu Key.
2.Turn and press the Encoder to select Settings > Update.
3.Turn and press the Encoder to select Factory reset. All settings will be restored to the factory default. At the completion of the reset process the stereo will automatically power down and restart.
57
