Volume control, Link to zone | Fusion MS-IP700 specification

Important: If a Zone is disabled, you cannot change any of the following settings for that Zone.

Volume control

Zones 3 and 4 can have volume control disabled. You should disable volume

control for a Zone that has its volume controlled from another amplifier or Head unit. If volume control is:

•Enabled: turning the Encoder will change line level output for the selected Zone only.

•Disabled: turning the Encoder will not change line level output for the selected Zone.

To enable or disable volume control:

a. Select the Volume Control menu item.

b. Press the Encoder to enable ( ) or disable ( ) volume control.

c.Press any key to exit

Link to zone 1

Zones 1 and 2 can be linked so that any volume or sub-woofer level changes

are applied to both Zones. A small “+” sign is displayed on screen between Zones 1 and 2 when this feature is enabled.

To link Zone 2 level to Zone 1 level:

a.Select the Link to zone 1 menu item.

b.Press the Encoder to link the two Zones ( ) or unlink ( ) the Zones.

c.Press any key to exit

Balance

To specify the balance for the selected Zone:

a. Select the Balance menu item.

b.Turn the Encoder to the left or right to adjust the Balance for the selected Zone.

c.Press any key to exit

41

Image 42

Fusion MS-IP700 Volume control, To enable or disable volume control, Link to zone, To link Zone 2 level to Zone 1 level

Contents

Series Manual USB Flash Drives Using iPodCare and Maintenance Handling CD or DVD disc’s MS-AV700 model only Register Your Product Online Contents Page Menu Tuner Auxiliary IPod Play/Pause Forward Power Mute Clock BrightnessUser Interface and Controls Source Rotary Encoder and Menu KEY You can use the Menu key to open or to exit from menus Adjusting levels Accessing Menus To power the unit on or off Opening Control ScreensGetting Started Adjusting Volume Level To adjust the volume level To mute and unmute the volume To set sub-woofer levels or tone Clock To set the alarm To clear the alarm To adjust the brightness of the display screen To select one of the available tuner bands Tuner To tune to a required frequency, channel or preset Example SiriusXM input source screen Tuning Applies When tuning with this method… Method To… To add a new preset To remove one or more presets Minimizing background noise Turning scan mode onTo turn scan mode on To set the squelch level To listen to input from your iPod IPod Selecting tracks from a playlist Controlling Playback Shuffle To change a setting in the iPod settings menuRepeat Searching Album artwork To listen to music from your USB flash driveSubtitles USB Flash Drive Selecting audio tracks from USB flash drive For example, to select a Folder then track Controlling playback To change a highlighted setting in the USB settings menu Changing USB Flash Drive Settings To listen to input from an alternate auxiliary device Auxiliary Input Fusion MS-NRX200 Remote Control Additional Features NMEA-2000 bus installation FUSION-only installation MS-AV700 model only DVD source selected DVD source not selected Installing the 700 Series Dimensions top view Dimensions side view Connections Description Colour Ethernet Connection Zone 2 R RED Installation Series Connection Example Setting UP the 700 Series Selecting and setting up a zoneEnabled To enable or disable the selected Zone Link to zone Volume controlTo enable or disable volume control To link Zone 2 level to Zone 1 level To specify the sub-woofer level for the selected Zone Volume limitSub-woofer level Name When using your iPod with either model To enter the name for the selected Zone MS-IP700 model Before inserting iPod To insert your iPod or USB flash drive MS-AV700 model To connect your iPod, you will needTo connect your USB flash drive, you will need MS-DKIPUSB Connecting auxiliary device Adjusting Auxiliary input levelSupported iPod sleeves Recommended settings are listed below To set the clockAudio quality To select 12 or 24 hour clock display mode Activating your SiriusXM tuner SiriusXM menu options ChannelsTo select a channel Special icons CategoryTo select a Category Parental mode To change the Parental mode access codeTo enter Parental menu To access a locked channel Channel Locking / unlockingTo lock or unlock a channel Sub filter Advanced SettingsChannel Skipping To set or unset a channel from being skipped Power save Key soundLanguage Tel mute Tuner regionVHF region To reset your 700 Series to factory default values Factory ResetTo enable or disable the AM of VHF tuner sources Sources Troubleshooting Appendices Problem Solution Problem Solution Wireless Remote App for iPad and iPhone Specifications General specificationsTuning range FCC compliance statement Japan VHF tuning rangeSUPPORT, Sales and Service Licensing Indexindex Output level Source screens Volume Page Page Page