FCC compliance statement, General specifications | Fusion MS-IP700

SPECIFICATIONS

FCC compliance statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

•this device may not cause harmful interference, and

•this device must accept any interference received, including interference that may cause undesired operation.

General specifications

Operating voltage	10.2–16 VDC negative ground
Fuse rating	15 amp
DVD player
Laser power	Class I
Power output
Maximum	70 W x 4
26 WRMS per channel at 4 ohms
45 WRMS per channel at 2 ohms
Pre-output voltage	3 VRMS

Auxiliary input sensitivity

The 700 Series AUX input sensitivity is 1V RMS when gain is set to 0dB.

•Increasing the gain by 6dB doubles the input sensitivity (0.5V RMS for same volume).

Tuning range

Europe and Australasia

FM radio frequency range 87.5–108 MHz.

Frequency step 100 kHz

AM radio frequency range 522–1620 MHz.

Frequency step 9 kHz

61

Image 62

Fusion MS-IP700 manual FCC compliance statement, General specifications, Auxiliary input sensitivity, Tuning range

Contents

Series Manual USB Flash Drives Using iPodCare and Maintenance Handling CD or DVD disc’s MS-AV700 model only Register Your Product Online Contents Page Menu Tuner Auxiliary IPod Play/Pause Forward Power Mute Clock BrightnessUser Interface and Controls Source Rotary Encoder and Menu KEY You can use the Menu key to open or to exit from menus Adjusting levels Accessing Menus Getting Started To power the unit on or offOpening Control Screens Adjusting Volume Level To adjust the volume level To mute and unmute the volume To set sub-woofer levels or tone Clock To set the alarm To clear the alarm To adjust the brightness of the display screen To select one of the available tuner bands Tuner To tune to a required frequency, channel or preset Example SiriusXM input source screen Tuning Applies When tuning with this method… Method To… To add a new preset To remove one or more presets Minimizing background noise Turning scan mode onTo turn scan mode on To set the squelch level To listen to input from your iPod IPod Selecting tracks from a playlist Controlling Playback Shuffle To change a setting in the iPod settings menuRepeat Searching Album artwork To listen to music from your USB flash driveSubtitles USB Flash Drive Selecting audio tracks from USB flash drive For example, to select a Folder then track Controlling playback To change a highlighted setting in the USB settings menu Changing USB Flash Drive Settings To listen to input from an alternate auxiliary device Auxiliary Input Fusion MS-NRX200 Remote Control Additional Features NMEA-2000 bus installation FUSION-only installation MS-AV700 model only DVD source selected DVD source not selected Installing the 700 Series Dimensions top view Dimensions side view Connections Description Colour Ethernet Connection Zone 2 R RED Installation Series Connection Example Setting UP the 700 Series Selecting and setting up a zoneEnabled To enable or disable the selected Zone Link to zone Volume controlTo enable or disable volume control To link Zone 2 level to Zone 1 level To specify the sub-woofer level for the selected Zone Volume limitSub-woofer level Name When using your iPod with either model To enter the name for the selected Zone MS-IP700 model Before inserting iPod To insert your iPod or USB flash drive To connect your USB flash drive, you will need MS-AV700 modelTo connect your iPod, you will need MS-DKIPUSB Supported iPod sleeves Connecting auxiliary deviceAdjusting Auxiliary input level Audio quality Recommended settings are listed belowTo set the clock To select 12 or 24 hour clock display mode Activating your SiriusXM tuner To select a channel SiriusXM menu optionsChannels To select a Category Special iconsCategory To enter Parental menu Parental modeTo change the Parental mode access code To lock or unlock a channel To access a locked channelChannel Locking / unlocking Sub filter Advanced SettingsChannel Skipping To set or unset a channel from being skipped Language Power saveKey sound VHF region Tel muteTuner region To reset your 700 Series to factory default values Factory ResetTo enable or disable the AM of VHF tuner sources Sources Troubleshooting Appendices Problem Solution Problem Solution Wireless Remote App for iPad and iPhone Specifications General specificationsTuning range FCC compliance statement Japan VHF tuning rangeSUPPORT, Sales and Service Licensing Indexindex Output level Source screens Volume Page Page Page