TP-Link TL-WN422G manual Installation Guide, Before You Begin, Installation for Windows XP

TL-WN422GHigh-Power Wireless USB Adapter User Guide

Chapter 2 Installation Guide

2.1 Before You Begin

During the installation, Windows 98/ME/2000/XP/2003/Vista may need to copy systems files from its installation CD. Therefore, you may need a copy of the Windows installation CD at hand before installing the drivers.

2.2 Installation for Windows XP

Follow the steps below in order to install the TL-WN422G High-Power Wireless USB Adapter drivers:

1.Insert the Resource CD into your CD-ROM drive, and open the folder named TL-WN422G. Then double-click Setup.exe in the proper folder according to your operating system to start the installation.

Once the setup begins you will see the Install Shield Wizard, as the image depicts as below.

Figure 2-1 Install driver wizard

2.Click on the Next button to continue.

3.Select the location where you would like the driver installed. Click on the Browse button to change the directory, or click on the Next button to continue using the default directory.

-5 -