Carrier Access Access Navigator user manual Log Config, Example log config ds0

CLI Language Reference

CLI Command List

Log Config

Purpose: Displays configuration log events. The Access Navigator maintains a log of the most recent 500 configuration changes in a separate log file. The log also records the management interface port used to make the changes. The Config log file will be erased by a power interruption, clear config log command, reset command, or restore defaults command.

Security: Level 3 (monitor)

Syntax: log config

Displays all configuration log events.

Syntax: log config ds0 <n:ch>

Displays only the configuration management events affecting a DS0 channel or range of channels.

Syntax: log config ds1 <n>

Displays only the configuration management events affecting a DS1 or range of DS1s.

Syntax: log config crv <value>

Displays only the configuration management events affecting a CRV or range of

CRVs.

Syntax: log config source <clieocsnmpicc>

Displays only the configuration management events from a management interface.

Field	Description
n	DS1 number, 1 to 32
ch	DS0 channel, 1 to 24
value	Call Reference Value, 1 to 768
cli	Command Line Interface using RS-232 port or Telnet Ethernet
	port.
eoc	Embedded Operations Channel using GR-303 DS1 interface
	group connected to a switch.
snmp	Simple Network Management Protocol using Ethernet port.
	(SNMP is used by MIB browsers and other management
	software.)
icc	Internal Controller Communication. Lists controller events that
	occurred while this Controller card was in standby.

Example: log config ds0 10:5

Access Navigator - Release 1.8 August 2003 18-41