Carrier Access Access Navigator user manual Status DS1, Syntax status ds1 n

CLI Language Reference

CLI Command List

Status DS1

Purpose: Displays a detailed DS1 service status message. (For a short status summary, use the status ds1 all command.)

Security: Level 3 (monitor)

Syntax: status ds1 <n>

	Field		Description
	n		DS1 number, 1 to 32, or a range of numbers such as 2-8.
Example: status ds1 12
Example: status ds1 1-4
Message:
Status for		DS1 1:		Traffic
Receive:
Transmit:				Traffic
Loop:				None
State:				In use as DROP
FDL Type:				None
Remote		Device Mgmt Type:		CA FDL
Remote		Device Mgmt Status:		In Service
Status for		DS1 2:		Traffic
Receive:
Transmit:				Traffic
Loop:				None
State:				In use as DROP
FDL Type:				T1403
Remote		Device Mgmt Type:		None
Status for		DS1 3:		Traffic
Receive:
Transmit:				Traffic
Loop:				None
State:				In use as DROP
FDL Type:				None
Remote		Device Mgmt Type:		None
Status for		DS1 4:		Loss of Signal
Receive:
Transmit:				RAI/Yellow Alarm
Loop:				None
State:				User set Out of Service
FDL Type:				None
Remote		Device Mgmt Type:		None

Access Navigator - Release 1.8 August 2003 18-159