Carrier Access Access Navigator user manual Remote Adit 600 FDL Provisioning Overview

Provision Remote Adit 600 via FDL

Remote Adit 600 FDL Provisioning Overview

Remote Adit 600 FDL Provisioning Overview

This procedure covers remote management and provisioning of Carrier Access’ Adit® 600 TDM Customer Service Terminals. The Adit 600 TDM provides six service card slots that support up to 18 T1s (DS1s) per unit, up to 48 voice channels, or any combination of voice and data services.

The Access Navigator / GR-303 + Data Host and GR-303 Host with P-Phone can both serve as a host for remote Adit 600 terminals, providing GR-303 voice concentration and data grooming. In addition to providing the user with remote management of the Adit 600, the Access Navigator requires a management link to the Adit 600 to process ISDN BRI calls through the Adit 600.

There are two management configurations:

￿FDL Management – sends CLI commands over the DS1’s ESF Facility Data Link (FDL)

￿IP DS0 Management – sends IP management commands over a DS0 channel in the DS1. This IP DS0 management configuration is required to support P-Phone service using an Access Navigator / GR-303 Host with P-Phone. See Provision Remote Adit 600 via IP DS0 on page 13-1.

Network		On-Net		Customer				Customer
Operations
		Location	Wiring Closet					Premises
Center
						Voice
							PBX		Stations
						Lines
CLI/Telnet								Key System
	SNMP	Access	FDL		V.35, T1				Fax
	TCP/IP
		Navigator						Ethernet
						or DSL
Access	Network
						Router
Navigator				Access
Element			T1
				Bank II
Manager	Voice					FXS/FXO		Key System
	Switch								Fax
						VoIP	PBX
									Stations
						T1 Drop
	Data
	Switch	Local		ADIT 600		10/100BaseT
		Management						Modem
		CLI/RS-232	Adit 600			RS232
						DDS
						ISDN BRI
						T1 Drop		Router Ethernet
						V.35
	Figure 12-1 Adit 600 Voice and Data Services with FDL Management

12-2 August 2003 Access Navigator - Release 1.8