Carrier Access Access Navigator user manual Status DS1 Performance History

	CLI Language Reference
	CLI Command List
Item	Description
Path Code Violations	(PCV) The total number of path code violations that have been
	detected during the measurement interval.
	For D4 signals, the PCV count is the number of frame bit errors.
	For ESF signals, the PCV count is the number of Cyclical
	Redundancy Count (CRC) errors and frame bit errors.
Elapsed time in current	The time in minutes:seconds that have elapsed during the current
15 min. interval	15 minute interval (determined by timer).
Valid 15 min. intervals	The number of completed 15 minute intervals used for
in hour	calculating 1-hour totals (determined by timer). Maximum value
	is 4.
Valid 15 min. intervals	The number of completed 15 minute intervals used for
in day	calculating 1-day totals (determined by timer). Maximum value
	is 96.
* indicates threshold	This text will appear when the error count exceeds the value set
value has been	by the Set DS1 Threshold on page 18-115.
exceeded.

Status DS1 Performance History

Purpose: Displays a tabular list of performance data for the specified DS1 during each 15-minute interval and the count totals for the day. Performance history shows the most recent 96 intervals.

NOTE: The clear performance command can be used to reset the performance data for a specific DS1. When this is done, the timer for that DS1 will start at zero hours, minutes, and seconds. (See Clear DS1 Performance on page 18-27.)

Security: Level 3 (monitor)

Syntax: status ds1 <n> performance history

Field

n

Description

DS1 number, 1 to 32, or a range of numbers such as 2-8.

Example: status ds1 9 performance history

Message:

Performance Statistics for DS1 #9

UAS	ES	SES SEFS		LES	CSS	BES	DM	LCV	PCV
---- ---- ---- ---- ---- ---- ---- ---- ------- -------
curr. interval:	0 822	0	0	0	0	822	13	0	0

Access Navigator - Release 1.8 August 2003 18-165