Miller Electric DVI-2 R manual Parts List, Drive Roll And Wire Guide Kits

SECTION 9 − PARTS LIST

9-1. Drive Roll And Wire Guide Kits

.Base selection of drive rolls upon the following recommended usages:

1V-Grooved rolls for hard wire.

2U-Grooved rolls for soft and soft shelled cored wires.

3U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).

4V-Knurled rolls for hard shelled cored wires.

5Drive roll types may be mixed to suit particular requirements (e.g. V-Knurled roll in combination with U-Grooved).

	Wire Diameter		Kit No.	Drive Roll		Inlet Wire
Fraction	Decimal	Metric		Part No.	Type	Guide
.023/.025 in.	.023/.025 in.	0.6 mm	087 131	087 130	V-Grooved	056 192
.030/.035 in.	.030/.035 in.	0.8/0.9 mm	204 579	203 526	V-Grooved	056 192
.030 in.	.030 in.	0.8 mm	079 594	053 695	V-Grooved	056 192
.035 in.	.035 in.	0.9 mm	079 595	053 700	V-Grooved	056 192

.A complete Parts List is available at www.MillerWelds.com

OM-232 368 Page 42