9.With the Saw Mill and wood stock already in place, turn on the band saw and allow it to come to full speed before continuing.
Caution: Avoid injuries. Always keep both hands and arms on one side of the saw blade. Never cross over the saw blade.
10.To begin cutting, place each hand on one Handle (5) and push the wood stock into the saw blade.
Push with a parallel movement to the saw blade in a smooth, even motion. Let the saw blade cut at its own speed. Do not force the wood stock into the saw blade.
11.When the cut is complete, immediately shut off the band saw.
Wait for the saw blade to stop before handling the wood stock and Saw Mill.
12.For the second and subsequent cuts, remove the mounting screws and rotate the wood stock. Replace mounting screws. Repeat steps 5 through 11. Only rotate the wood stock when the Band Saw is turned OFF.
Maintenance
1.Before each use, ensure all assembly screws are tight.
2.Periodically apply a light oil to the Acme Screw (8).
3.Store in a clean and dry location.
Parts List
Item | Description | Qty |
1. | Guide Slide with | 1 |
| Adjustment Plate |
|
2. | Base Plate | 1 |
3. | Back Plate | 1 |
4. | Slide Plate | 1 |
5. | Handle | 2 |
6. | Mounting Plate | 1 |
7. | Bushing | 1 |
8. | Acme Screw with Knob | 1 |
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 92247 | For technical questions, please call | Page 7 |
