Carrier Access Access Navigator user manual Set DS1 Framing, Syntax set ds1 n framing d4esfslc96

CLI Language Reference

CLI Command List

Syntax: set ds1 <n> fdl <noneslc96t1403>

Field

n

none

slc96

t1403

Description

DS1 number, 1 to 32, or a range of numbers such as 2-8.

Disable FDL. (This is the required setting for remote management of Adit 600 terminals. See Set DS1 Remote Device Mgmt on page 18-113.)

Enable communications with Shelf A of SLC-96/TR-08 group. (Supports Access Bank I/TR-08 and line loopback commands.)

Enable detection and response to ANSI T1.403 bit-patterned codes over the FDL.

Example: set ds1 12 fdl none

Example: set ds1 12 fdl t1403

Set DS1 Framing

Purpose: Sets the DS1 framing type to D4, ESF, or SLC-96.

Switch DS1s for GR-303 use ESF. Drop DS1s to the Access Bank I/TR-08 use SLC- 96 framing. Drop DS1s to a remote Access Bank II use ESF framing, B8ZS line coding, and CA FDL management. For Adit 600 drop DS1s, see Application Configuration Requirements on page 18-107.

NOTE: The service application affects the permissible DS1 Type, Framing, Line Code, and FDL selections. For example, ESF is required for remote provisioning, which uses the ESF FDL channel for management communications. ESF is the default setting for the Access Bank II.

Security: Level 2 (operator)

Syntax: set ds1 <n> framing <d4esfslc96>

Field	Description
n	DS1 number, 1 to 32, or a range of numbers such as 2-8.
d4	Set DS1 to D4 framing.
esf	Set DS1 to ESF framing.
slc96	Set DS1 to SLC-96/TR-08 framing.

Example: set ds1 9 framing esf

18-108 August 2003 Access Navigator - Release 1.8