Gardena C 1060 profi manual Error message ERRO R On/Off Prog, Soil Moisture Sensor, Rain Sensor

Models: C 1060 profi

1 18
Download 18 pages 52.26 Kb
Page 11
Image 11
Error message ( ERRO R )

GB

Error message ( ERRO R )

On/Off Prog.

20

The pre-programming takes into consideration the 30 minute

 

By briefly opening the water flow the outlets on the Automatic

break required between the programs as well as a minimum

 

Water Distributor are switched further so that when the watering

watering time of 30 seconds (display: 1 min.).

 

programs are reactivated (% Run-Time)the original order of the

This watering time is required to allow the Automatic Water

 

outlets for the required watering program is retained.

Distributor to switch to the next outlet and to ensure that the

Soil Moisture Sensor /

When using the Water Computer C 1060 prof together

order of the watering programs to the appropriate watering

line is retained.

Rain Sensor

with the Automatic Water Distributor, Soil Moisture Sensor

The watering days entered for the watering program are valid

 

(Art. No. 1187) or Rain Sensor electronic (Art. No. 1189)

for all other watering programs.

 

please note the following:

 

 

If the special function is activated and the Soil Moisture or

You can alter the watering starting times and watering times

 

Rain Sensor indicates sufficient moisture, watering is interrupted.

pre-programmed by the Water Computer to meet your personal

 

The watering time of following watering programs is shortened

requirements. However, if you do not take into account the break

 

to 30 seconds (display: 1 min.) until the Soil Moisture / Rain

times mentioned above, any changes you make are not accepted

 

Sensor allows the watering programs to be resumed. The water-

and an error message appears on the display (ERRO R ).

 

ing time originally entered then begins.

Since it is very easy for watering times to overlap slightly, espe-

 

Shortening the watering time when the soil is sufficiently moist

cially when the beginnings and ends of programs are very close

 

ensures that the automatic water distributor is switched to the

together, it is sensible to RESET the Water Computer and to

 

next outlet and therefore ensures that the correct order of the

re-enter the watering data to prevent an error message appearing.

 

watering program for the respective distributor outlet is retained.

If the watering programs are switched off after you have con-

 

 

firmed the special function (status indicator on Off Prog.) all the

 

 

programs which begin in this time are shortened to the minimum

 

 

watering time of 30 seconds (display: 1 min.) This ensures that

 

 

the order of the watering programs to the appropriate outlet of

 

 

the Automatic Water Distributor is retained.

 

 

 

 

21

GB

Page 11
Image 11
Gardena C 1060 profi manual Error message ERRO R On/Off Prog, Soil Moisture Sensor, Rain Sensor