Gardena C 1060 profi manual RUN TIME and the hours for the watering time flash on the display

GB

5.

6.

7.

8 (a)

14

5.Set the minutes for starting the watering time with the ▲-key (example: 20 minutes) and confirm with the O.K.-key.

RUN TIME and the hours for the watering time flash on the display.

6.Set the hours for the watering time with the ▲-key (example: 0 hours) and confirm with the O.K.-key.

RUN TIME and minutes for the watering time flash on the display.

7.Set watering time minutes with the ▲-key

(example: 1 0 minutes) and confirm with the O.K.-key. Watering cycle ■ 3rd flashes on the display.

8.(a) Select watering cycle with the ▲-key (example: ■ 2nd) and confirm with the O.K.-key

(2nd / 3rd : watering every 2nd day / 3rd day).

The display returns to step 3 and the next highest program memory setting flashes.

– or –

8. (b)

Activate watering programs:

10.

8.(b) Select respective watering days with the ▲-key (example: ■ Mo, ■ Fr Monday and Friday) and confirm with the O.K.-key. Press ▲-key until the ■ over Su disappears.

The display returns to step 3 and the next highest program memory setting flashes.

VIf you would like to water your garden every day, press the OK button to confirm each day one after another.

When the program has been created for program memory setting 6, the display moves to the message % Run-Time / Prog. Off.

You must select the Run-Timepercentage you wish to activate before the watering programs can run.

9.Press Menu-key 3 times (not necessary if the program has just been compiled for program memory setting 6).

10.Select the percentage (see Budget Function) for the pro- grammed watering time using the ▲ key (e.g. 60 % Run-Time) and then confirm your selection by pressing the O.K. key.

The display moves to the normal display.

Programming the Water Computer has now been completed, i.e. the built-in valve opens / closes entirely automatically and thus undertakes watering at the programmed times.

15

GB