GB
Fault | Possible Cause | Remedy |
Watering program is not | Valve was opened manually | v Avoid possible program |
9. Putting Your Water Computer out of Operation
GB
being undertaken | previously. | overlaps. | |
(no watering) |
|
| |
Tap turned off. | v Turn on tap. | ||
| |||
|
|
| |
| Program overlap | v Enter new watering | |
| (1st watering start time has | program without overlaps. | |
| priority). |
| |
|
|
| |
| Soil moisture or rain sensor | v If dry, check setting/ | |
| reports sufficient moisture. | location of soil moisture/ | |
|
| rain sensor. | |
|
|
| |
| Batt. indicator flashes because | Insert new (alkaline) battery |
1.Press
The watering programs are deleted.
2.Store your Water Computer in a dry place where it is protected from frost.
Please return flat batteries to a GARDENA dealer or dispose of them properly at your nearest recycling centre. Only dispose of batteries when they are flat.
|
| v |
| battery is almost flat. |
|
|
|
|
Water Computer does | Minimum quantity of water | v Connect more drip heads |
not close | drawn is less than 20 l/ h. |
|
|
|
|
If you have any other problems with your Water Computer, please contact GARDENA Service.
10. Accessories
Automatic control with: | GARDENA Soil Moisture Sensor | Art. No. 1187 |
| GARDENA Rain Sensor electronic | Art. No. 1189 |
|
|
|
| GARDENA Automatic Water Distributor | Art. No. 1198 |
24 | 25 |