Gardena C 1060 profi Automatic Water Distributor optional, display moves to the normal display

GB

Reset	The factory settings are restored.
	v Press ▲-key and O.K.-key simultaneously for 2 seconds.

6. Automatic Water Distributor (optional)

GB

All the LCD symbols are displayed for 2 seconds and the

•

display moves to the normal display.

All the program data are set to zero.

•

The manual watering period is set to 0 : 30 again.

•

The time and day of the week are retained.

Important notes:

If no entry is made during programming for a period of more

than 60 seconds, the normal display reappears.

With overlapping programs and identical watering days, the

1st watering starting time has priority and other programs are

not initiated.

Example :

Program

Starting time

Watering time

Watering days / Watering cycles

PROG

START TIME

RUN TIME

Mo

Tu

We

Th

Fr

Sa

So

2nd

3rd

1

4:00

0:40

X

X

2

4:30

1:00

X

The first program is run on Monday, the 2 nd program is cancelled. 18

Function

Programming

Special function

Connecting the GARDENA Automatic Water Distributor (Art. No. 1198) allows you to control up to 6 watering lines with the Water Computer C 1060 profi.

Each of the 6 watering lines can only be actuated once a day.

This is ideal where there is an insufficient amount of water or where individual areas of the garden have varying water require- ments. It allows all watering lines to be operated one after another.

Using the special function, your Water Computer C 1060 profi is able to take into account the special requirements of the Automatic Water Distributor, when programming.

If program data have already been inserted beforehand, a RESET must be undertaken before the special function can be set.

vKeep ▲-key and O.K.-key pressed simultaneously for 2 seconds.

To ensure the Automatic Water Distributor switches safely there must be at least a 30 minute break between the programs entered in the Water Computer.

When you have confirmed the special function with O.K. and have entered the data for the first program (see 5. Programming) all the programmes which follow will be pre-programmed auto- matically.

19