Gardena C 1060 profi manual Function, Setting up, Programming, Key-operated functions

GB

The battery must be exchanged in time to pre- vent the Water Computer failing due to a low

does not affect the program in any way. When the computer cools down the LCD

3. Function

GB

battery when you are away for longer periods of time. Make sure that the time the battery has been in operation and the time you are planning to be away does not add up to more than a year.

Setting up

Warning! The Water Computer must not be used indoors.

vOnly use the Water Computer outdoors.

The Water Computer may only be set up verti- cally with the sleeve nut to the top to prevent water penetrating into the battery compart- ment.

The minimum water output to ensure that the Water Computer functions correctly is 20 - 30 l/h.

For example, at least 10 x 2-litre Drip Heads are required to control the Micro-Drip-System.

At high temperatures (over 60 °C at the dis- play) the LCD display may extinguish. This

display illuminates again.

The max. temperature for the water flow is 40 °C.

vOnly use clear fresh water.

The minimum operating pressure is 0,5 bar, the maximum operating pressure is 12 bar.

Avoid tensile strain.

vDo not pull the hose connected to the Water Computer.

Programming

vProgram the Water Computer with the tap turned off.

In this way you can avoid getting wet when trying out the manual On / Off function (man. On/Off). You can remove the control unit from the housing to program the Water Computer.

Key-operated functions

4 1 2 3

This GARDENA Water Computer C 1060 profi allows you to water your garden completely automatically any time you choose up to 6 times a day, whether you are using a sprinkler, a sprinkler system installation or a drip-head watering system.

Your Water Computer waters your garden completely automati- cally according to the program you choose. You can use your Water Computer to water your garden early in the morning or late at night when water evaporates the least or when you are on holiday.

You simply program the watering start, watering time and watering day(s) or cycles.

Key	Key-operated function
1 ▲	Changes or moves on the input data. (If the
	▲-key is held down, the figures change very
	quickly.)

2O.K. Confirms the values set with the ▲-key.

3Menu Changes to the next program level.

4man. For switching the water throughput on or off

On/Off manually.

4 5