JVC SR-VS30U manual DV recording indicator lights on the VCR

Filename [VS30U_1a-EN.fm]

	Masterpage:Right-NoTitle0
VS30U_1a-EN.fm Page 37 Thursday, January 31, 2002 3:35 PM

EN 37

Basic Recording A Load a cassette.

(DV deck)

Turn on the TV and select the AV mode.

Insert a Mini DV cassette with the erase protection switch set to “REC”.

●The VCR’s power comes on automatically.

B Select the DV deck.

Press DV.

●The DV button lights on the VCR.

1 3 2

C Choose a program.

On the Remote

Press CH +/– or the number keys.

On the VCR

Push the ADVANCED JOG dial and turn it to the left or right to select the channel you wish to record.

D Set the tape speed.

Press SP/LP (p). Check the SP/LP indicator on the VCR’s front display panel to confirm the selected tape speed.

1	T	W
	2	3

2

4 5 6

7 8 9

04

1 DV S-VHS

E Start recording.

Press and hold REC (7) and press PLAY (4) on the Remote, or press REC (7) on the VCR.

●The DV recording indicator lights on the VCR.

F Pause/Resume recording.

Press PAUSE (9). Press PLAY (4) to resume recording.

●You can select channel during the Record Pause mode.

G Stop recording.

Press STOP (8). Then press EJECT () to remove the cassette.

●The DV recording indicator turns off.

NOTES:

●It is not possible to record a TV program on both the VHS deck and the DV deck simultaneously. However, it is possible to record simultaneously from the same external input. Set the input mode to “L-1”, “L-2” or “F-1” depending on the connectors being used.

●When you record a tape on the DV deck with the recording speed set to “LP”, it is recommended to play back the tape on this DV deck. Digital video recorder from other manufacturers may not be able to play back the tape properly.

Page 37

January 31, 2002 3:35 pm