Filename [VS30U_1-EN.fm]
Masterpage:Left
10 EN
Page 10 January 31, 2002 3:21 pm
INDEX (cont.)
ON-SCREEN DISPLAY (for VHS deck)
If you press DISPLAY/OSD on the Remote when “SUPERIMPOSE” is set to “ON” (墌pg.71), various operational
indicators appear on the TV screen.
AOperation Mode Indicators
BTape Speed SP/EP
CTimer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press CANCEL on the Remote.
DTape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW(3)
or FF (5) from the Stop
mode or perform an Index
Search (墌pg.30). The
position of “q” in relation to
“B” (beginning) or “E” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
EIndex number 墌pg. 30
FTape Remaining Time Indicator
GCounter Display 墌pg. 33
HAudio Mode Display 墌pg. 31
IVHS Indicator
JSAP Indicator 墌pg. 34
KStereo program Indicator 墌pg. 34
LDay/Clock Display
MChannel Position Number/
Auxiliary Input Indicator (L-1 or F-1)
Dubbing Direction Indicators
(DV ]VHS) 墌pg. 52
N“Cassette Loaded” Mark
Beginning End To recall an indication
APress DISPLAY/OSD.
●All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
BPress DISPLAY/OSD again to clear the display.
●The RECORD/PAUSE indication remains on the screen.
VS30U_1-EN.fm Page 10 Thursday, January 31, 2002 3:33 PM