Masterpage:Right-NoTitle0
EN 55
Filename [VS30U_3-EN.fm]
Page 55 January 31, 2002 3:40 pm
Normal Dubbing
(from VHS to DV)
NOTES:
●If you set the dubbing direction incorrectly, you could erase an
important recording that you wanted to copy. It is
recommended to conduct a test with unimportant cassettes
first.
●There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
●The superimposed indication during the operation or dubbing
is not recorded.
●To cancel the dubbing mode, press CH +/– so that the dubbing
direction indicator ( S-VHS) goes off.
●Before you start dubbing, set “SOUND MODE” to the
appropriate mode. (墌pg. 76)
You can dub selected scenes on a tape, starting and
stopping wherever you wish.
ALoad cassettes.
For the VHS deck
Insert a VHS (or S-VHS) cassette with the record safety
tab removed.
For the DV d eck
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
BSelect the dubbing direction.
Press .
●The dubbing direction indicator ( S-VHS) lights.
CSet the tape speed.
Press DV, then press SP/LP (p).
●“VHS ]DV” appears on the TV screen if “SUPERIMPOSE” is
set to “ON”. (墌pg. 71)
DLocate the start point on the VHS deck.
APress S-VHS.
BPress PLAY(4) to start playback.
CPress PAUSE (9) to pause playback a little before the
start point.
EPrepare the DV deck for dubbing.
APress DV.
BPress and hold PAUSE (9) and press REC (7) so that
the DV deck enters the Record Pause mode.
●VHS playback indicator and DV recording indicator light.
FStart dubbing.
Press START
.
GPause dubbing.
Press START
.
●The DV deck enters the Recording Pause mode, then the VHS
deck enters the Dubbing Pause mode.
HEnd dubbing.
Press STOP (8) to stop recording on the DV deck. Then
press S-VHS and press STOP (8) to stop playback on the
VHS deck.
132
123
456
789
0
2
4
1
3
T W
DV S-VHS
VS30U_3-EN.fm Page 55 Thursday, January 31, 2002 3:40 PM