Masterpage:Right-NoTitle0
EN 27
Filename [VS30U_1a-EN.fm]
Page 27 January 31, 2002 3:35 pm
Basic Recording
(VHS deck)
ALoad a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
The VCR’s power comes on automatically.
BSelect the VHS deck.
Press S-VHS.
The S-VHS button lights on the VCR.
CChoose a program.
On the Remote
Press CH +/– or the number keys.
On the VCR
Push the ADVANCED JOG dial and turn it to the left or
right to select the channel you wish to record.
DSet the tape speed.
Press SP/EP (p). Check the SP/EP indicator on the
VCR’s front display panel to confirm the selected tape
speed.
EStart recording.
Press and hold REC (7) and press PLAY(4) on the
Remote, or press REC (7) on the VCR.
The VHS recording indicator lights on the VCR.
FPause/Resume recording.
Press PAUSE (9). Press PLAY (4) to resume recording.
You can select channel during the Record Pause mode.
GStop recording.
Press STOP (8). Then press EJECT ( ) to remove the
cassette.
The VHS recording indicator turns off.
NOTE:
It is not possible to record a TV program on both the VHS deck
and the DV deck simultaneously. However, it is possible to
record simultaneously from the same external input. Set the
input mode to “L-1”, “L-2” or “F-1” depending on the connectors
being used.
Turn on the TV and select the AV mode.
132
123
456
789
0
2
4
1
3
T W
DV S-VHS
Video Calibration takes place at the beginning of both the
first SP and the first EP recording after inserting the cassette.
(pg. 35)
VS30U_1a-EN.fm Page 27 Thursday, January 31, 2002 3:35 PM