JVC SR-VS30U manual Express Timer, Access the PlusCode screen, Access the Program screen

Filename [VS30U_2-EN.fm]

VS30U_2-EN.fm Page 46 Thursday, January 31, 2002 3:38 PMMasterpage:Left

46 ENTIMER RECORDING (cont.)

Express Timer
	A Turn on the VCR.
Programing	Press POWER.
	B
		Load a cassette.

If you do not know the PlusCode number for the program you wish to record, use the following procedure to set your VCR to timer-record the program.

Before performing Express Timer Programing:

●Make sure that the VCR’s built-in clock is set properly.

●Turn on the TV and select the AV mode.

Insert a VHS (or S-VHS) cassette with the record safety tab intact.

OR

Insert a Mini DV cassette with the erase protection switch set to “REC”.

C Select the deck.

Press S-VHSor DV.

T	W	3
1	2
		2
4	5	6
7	8	9
	0	4
1	DV	S-VHS

D Access the PlusCode screen.

Press PROG.

E Access the Program screen.

Press START+/–. (If you’re just starting out and you have selected the VHS deck, “VHS PROGRAM 1” appears.)

F Enter the program start time.

Press START+/– to enter the time you want recording to start.

● Press and hold START+/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

G Enter the program stop time.

Press STOP+/– to enter the time you want recording to stop.

●Press and hold STOP+/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

Page 46

January 31, 2002 3:37 pm