Masterpage:Right-NoTitle0
EN 11
Filename [VS30U_1-EN.fm]
Page 11 January 31, 2002 3:21 pm
ON-SCREEN DISPLAY (for DV deck)
If you press DISPLAY/OSD on the Remote when “SUPERIMPOSE” is set to “ON” (墌pg.71), various operational
indicators appear on the TV screen.
AOperation Mode Indicators
BTape Speed SP/LP
CSound Mode Display 墌pg. 76
DTimer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press CANCEL on the Remote.
ERROR Indicator*
* ERROR indicat or appears when you start dubbing a tape with a
copy protection signals or when Audio Dubbing or Insert Editing is
not possible depending on the condition.
ETime Code Display 墌pg.41, 76
FAudio Mode Display 墌pg. 40
GDV Indicator
HSAP Indicator 墌pg. 41
IStereo program Indicator 墌pg. 41
JDay/Clock Display
KChannel Position Number/
Auxiliary Input Indicator (L-1 or F-1)
Dubbing Direction Indicators
(VHS ]DV) 墌pg. 53
L“Cassette Loaded” Mark
To recall an indication
APress DISPLAY/OSD.
●All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
BPress DISPLAY/OSD again to clear the display.
●The RECORD/PAUSE indication remains on the screen.
VS30U_1-EN.fm Page 11 Thursday, January 31, 2002 3:33 PM