JVC SR-VS30U manual Tape Dubbing, 52 EN, Dubbing An Entire Cassette, From DV to VHS

Filename [VS30U_3-EN.fm]
VS30U_3-EN.fm Page 52 Thursday, January 31, 2002 3:40 PM	Masterpage:Left

52 EN	EDITING
Tape Dubbing	Dubbing An Entire Cassette
	Because this VCR includes both VHS deck and DV deck, you
	can easily use it for dubbing without connecting any other
(from DV to VHS)	equipment.

A Load cassettes.

1 3 2

For the VHS deck

Insert a VHS (or S-VHS) cassette with the record safety tab intact, or cover the hole using adhesive tape.

For the DV deck

Insert a Mini DV cassette with the erase protection switch set to “SAVE”.

T	2	W
1		3

2

4 5 6

7 8 9

04

1 DV S-VHS

B Select the dubbing direction.

Press .

●The dubbing direction indicator (DV ) lights.

C Set the tape speed.

Press S-VHS, then press SP/EP (p).

●“DV ] VHS” appears on the TV screen if “SUPERIMPOSE” is set to “ON”. ( pg. 71)

D Start dubbing.

Press DUB for more than 2 seconds.

●DV playback indicator and VHS recording indicator light.

●If the tapes have not been rewound, both decks rewind automatically. The VHS deck goes into Record Pause mode, and the DV deck goes into Pause mode.

When both decks have finished rewinding, dubbing begins automatically.

After dubbing is completed, the decks rewind both tapes automatically and eject them. The VCR then shuts off.

NOTES:

●If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to copy. It is recommended to conduct a test with unimportant cassettes first.

●If you start dubbing a copy-protected tape, “ERROR” message is displayed on screen and the dubbing is aborted.

●To cancel the dubbing mode, press CH +/– so that the dubbing direction indicator (DV ) goes off.

Page 52

January 31, 2002 3:40 pm