Filename [VS30U_3-EN.fm]
Masterpage:Left
58 EN
Page 58 January 31, 2002 3:40 pm
EDITING (cont.)
Edit To Or From
Another VCR/PC
You can use your VCR as the source player or as the
recording deck.
AMake connections.
Connect an audio/video cable between the player’s
VIDEO OUT and AUDIO OUT connectors and the
recorder’s VIDEO IN and AUDIO IN connectors.
●If connecting a VCR with an S-VIDEO input/output connector,
it is recommended to use the S-VIDEO connection to
minimize picture degradation while editing.
BSet the input mode of recording deck.
If using your VCR as a recording deck, press AUX
(number key “0”) and/or CH +/– to select “L-1”.
L-1: when connecting the VCR to the audio/video input
connectors on the rear panel.
●When using S VIDEO connector, set “REAR AUX INPUT” to
“S-VIDEO”. (墌pg. 71 )
●When using VIDEO connector, set “REAR AUX INPUT” to
“VIDEO”. (墌pg. 71)
CSelect the recording deck.
Press S-VHS or DV.
DSet the edit mode. (VHS deck only)
See “PICTURE CONTROL” on page 73.
EStart the source player.
Engage the Play mode of the source player.
FStart the recording deck.
Engage the Record mode of the recording deck.
123
456
789
0
2
4
1
3
T W
DV S-VHS
VS30U_3-EN.fm Page 58 Thursday, January 31, 2002 3:40 PM