Masterpage:Right-NoTitle0
EN 69
Filename [VS30U_3-EN.fm]
Page 69 January 31, 2002 3:40 pm
DBS Receiver Multi-Brand Remote
Control
Your Remote can operate the basic functions of your DBS (Direct
Broadcast Satellite) receiver set. In addition to JVC DBS
receivers, other manufacturer’s DBS receivers can also be
controlled.
IMPORTANT
Although the supplied Remote unit is compatible with JVC DBS
receivers, as well as many other models, it may not work with
your DBS receiver, or in some instances, may have limited
function capability.
ASet the DBS receiver brand code.
ASet the VCR/TV/CABLE/DBS switch on the VCR's
Remote to CABLE/DBS.
BPress and hold POWER.
CPress the number keys to enter your DBS receiver’s
brand code.
DPress STOP (8), and release POWER. The DBS
receiver should turn off. If it does, try other operations
(墌step 2).
●Once you have set the Remote to operate the DBS receiver,
you do not have to repeat this step until you replace your
Remote’s batteries.
●Some brands of DBS receiver have more than one code. If the
DBS receiver does not function with one code, try entering
another.
BOperate the DBS receiver.
Press the corresponding button: POWER,
TV CH +/–, number keys.
●For some brands of DBS receiver, you must press ENTER after
having pressed the number keys.
●To return the Remote to VCR control, Set the VCR/TV/CABLE/
DBS switch to VCR.
NOTES:
●You must set the DBS receiver brand for your Remote and the
DBS receiver brand for your Controller (墌pg.24) separately.
●It's not possible to operate a DBS receiver that is not equipped
with a remote control sensor.
●It's not possible to set the Remote for both your DBS receiver
and a cable box at the same time. You can only set the Remote
to operate one of these units at a time.
Before performing the following steps:
Turn ON the DBS receiver using its Remote.
123
456
789
0
2
4
1
3
T W
DV S-VHS
BRAND NAME CODE
JVC (DISH Network)
ECHOSTAR (DISH Network)
SONY (DSS)
RCA (DSS)
51
51
41
40
VS30U_3-EN.fm Page 69 Thursday, January 31, 2002 3:40 PM