Filename [VS30U_3-EN.fm]
Masterpage:Left
56 EN
Page 56 January 31, 2002 3:40 pm
EDITING (cont.)
Edit From A
Camcorder
You can use a camcorder as the source player and your
VCR as the recording deck.
You can perform digital dubbing if you connect a device
such as a camcorder which has a DV IN/OUT connector.
Because the signals are digital, there is no loss of video or
audio quality as a result of editing.
AMake connections.
AIf the camcorder has no S-VIDEO output connector...
... connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the VCR’s front panel AUDIO and
VIDEO input connectors.
BIf the camcorder has an S-VIDEO output connector...
... connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the VCR’s front panel
AUDIO and S-VIDEO input connectors.
CIf the camcorder has a DV IN/OUT connector...
... connect the camcorder’s DV IN/OUT connector to
the VCR’s DV IN/OUT connector.
●When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your VCR.
●When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the VCR. Refer to the
camcorder’s instruction manual for operating procedure.
BSet the VCR’s input mode.
Press AUX (number key “0”) and/or CH +/– to select
“F-1”.
F-1:when connecting the camcorder to the audio/video
input connectors or DV IN/OUT connector on the front
panel.
●When using S VIDEO connector, set “FRONT AUX INPUT” to
“S-VIDEO”. (墌pg. 73)
●When using VIDEO connector, set “FRONT AUX INPUT” to
“VIDEO”. (墌pg. 73)
CSelect the recording deck.
Press S-VHS or DV.
●To edit from a camcorder to the VHS deck through the DV IN/
OUT connector, press .
●To edit from a camcorder to the DV deck through the S-VIDEO
(VIDEO)/AUDIO input connectors, press .
DSet the edit mode. (VHS deck only)
See “PICTURE CONTROL” on page 73.
EStart the camcorder.
Engage the Play mode of the camcorder.
FStart the VCR.
Engage the Record mode of the VCR.
132
123
456
789
0
2
4
1
3
T W
DV S-VHS
VS30U_3-EN.fm Page 56 Thursday, January 31, 2002 3:40 PM