Fluke manual Error Code 1214 to -1240, CNT-8X Device specific errors leading 1 only for PM6681

		Error Messages
	CNT-8X Device specific errors (leading 1 only for PM6681)
Error	Error Description	description/explanation/examples
Number
(1)214	Hash table overflow	The hash table was too small to hold all mnemon-
		ics. Ordinarily indicates a failure to read (RAM or
		ROM) correctly. Contact your local service center.
(1)220	Parser error	Generic error in the parser.
(1)221	Illegal parser call	The parser was called when it should not be active.
(1)222	Unrecognized input	A character not in the valid IEEE488.2 character set
	character	was part of a command.
(1)223	Internal parser error	The parser reached an unexpected internal state.
(1)230	Response formatter	Generic error in the response formatter.
	error
(1)231	Bad response for-	The response formatter was called when it should
	matter call	not be active.
(1)232	Bad response for-	The response formatter was called to output an end
	matter call (eom)	of message, when it should not be active.
(1)233	Invalid function	The response formatter was requested to output
	code to response	data for an unrecognized function.
	formatter
(1)234	Invalid header type	The response formatter was called with bad data for
	to response format-	the response header (normally empty)
	ter
(1)235	Invalid data type to	The response formatter was called with bad data for
	response formatter	the response data.
(1)240	Unrecognized error	An error number was found in the error queue for
	number in error	which no matching error information was found.
	queue

See also Error Messages in Appendix 1 of the Operators Manual.

Error Code (1)214 to -(1)240 8-15