Fluke PM6681R, PM6685R manual Error Code -105 to -120

		Error Messages
		Command Errors
Error	Error Description	Description/Explanation/Examples
Number
–105	GET not allowed	A Group Execute Trigger was received within a pro-
		gram message (see IEEE-488.2, 7.7).
–108	Parameter not al-	More parameters were received than expected for
	lowed	the header; for example, the ∗EMC common com-
		mand accepts only one parameter, so receiving
		∗EMC0,,1 is not allowed.
–109	Missing parameter	Fewer parameters were received than required for
		the header; for example, the ∗EMC common com-
		mand requires one parameter, so receiving ∗EMC is
		not allowed.
–110	Command header	An error was detected in the header. This error
	error	message is used when the counter cannot detect
		the more specific errors described for errors –111
		though –119.
–111	Header separator	A character that is not a legal header separator was
	error	encountered while parsing the header; for example,
		no space followed the header, thus ∗GMC"MACRO"
		is an error.
–112	Program mnemonic	The header contains more than 12 characters (see
	too long	IEEE-488.2, 7.6.1.4.1).
–113	Undefined header	The header is syntactically correct, but it is unde-
		fined for this specific counter; for example, ∗XYZ is
		not defined for any device.
–114	Header suffix out of	Indicates that a non-header character has been en-
	range	countered in what the parser expects is a header el-
		ement.
–120	Numeric data error	This error, as well as errors –121 through –129, are
	Numeric data error;	generated when parsing a data element that ap-
	overflow from con-	pears to be of a numeric type. This particular error
	version	message is used when the counter cannot detect a
	Numeric data error;	more specific error.
	underflow from con-
	version
	Numeric data error;
	not a number from
	conversion

Error Code -105 to -120 8-3