Fluke PM6685R, PM6681R manual Error Code -222 to, Execution errors, Error Description, Number

Error Messages

		Execution errors
Error	Error Description	description/explanation/examples
Number
–222	Data out of range	Indicates that a legal program data element was
		parsed but could not be executed because the inter-
		preted value was outside the legal range as defined
		by the counter (see IEEE-488.2, 11.5.1.1.5.).
	Data out of range;	The expression was too large for the internal float-
	exponent too large	ing-point format.
	Data out of range;	Data below minimum for this function/parameter.
	below minimum
	Data out of range;	Data above maximum for this function/ parameter.
	above maximum
	Data out of range;	A number outside 0 to 19 was given for the save/re-
	(Save/recall mem-	call memory.
	ory number)
–223	Too much data	Indicates that a legal program data element of block,
	Too much data;	expression, or string type received that contained
	∗PUD string too	more data than the counter could handle due to
	long	memory or related counter-specific requirements.
	Too much
	data;String or block
	too long
–224	Illegal parameter	Used where exact value, from a list of possible val-
	value	ues, was expected.
–230	Data corrupt or	Possibly invalid data; new reading started but not
	stale	completed since last access.
–231	Data questionable
	Data questionable;	One or more data elements sent with a MEASure or
	one or more data el-	CONFigure command was ignored by the counter.
	ements ignored
–240	Hardware error	Indicates that a legal program command or query
		could not be executed because of a hardware prob-
		lem in the counter. Definition of what constitutes a
		hardware problem is completely device specific. This
		error message is used when the counter cannot de-
		tect the more specific errors described for errors
		–241 through –249.

8-8 Error Code -222 to -240