Fluke PM6685R, PM6681R MEASure VOLT PTPeak?, MEASure RISE TIME?, Peak-to-Peak Voltage, Rise-time

:MEASure [:VOLT] :PTPeak?

[￿ (@«12»)].

Peak-to-Peak Voltage

PM6680B PM6681

This command make measures the peak-to-peak voltage with the input DC cou- pled.

Parameters:

(@«12») is the channel to measure on (@1) means input A

(@2) means input B

Complies to standards: SCPI 1991.0, confirmed.

:MEASure :RISE :TIME?
	PM6680B PM6681
[￿ [<lower threshold> [,<upper threshold>[,<expected value>[,<resolution>]]]] [,(@1)]

Rise-time

The transition time from 10% to 90% of the signal amplitude is measured.The measurement is always a single measurement and the Auto-trigger is always on, setting the trigger levels to 10% and 90 % of the amplitude. If you need an aver- age transition time measurement or other trigger levels, use the :SENSe subsys- tem and manually set trigger levels instead.

Parameters:

<lower threshold>, <upper threshold>, <expected value> and <resolution are all ignored by the counter

<(@1)> is the channel to measure on, i.e., input A

Complies to standards: SCPI 1991.0, confirmed.

9-68 Command Reference