Fluke PM6681 FORMat FIXed, FORMat SREGister, Response Data Format, Data Type for Status Messages

	:FORMat :FIXed
PM6680B/81/85
	￿ <Boolean>

Response Data Format

Sets the ASCii format to fixed. This results in the following response format:

<sign><mantissa value>E<sign><exponent value>

Where:

<sign> = +–

<mantissa value> = 12 digits plus one decimal point. <exponent value> = 3 digits

Parameters <Boolean> = (1 / ON 0 / OFF)

￿The counter will add leading zeroes when the measurement resolution is less than 12 digits.

Returned format: 10 ￿

*RST condition: OFF

PM6681

:FORMat :SREGister

￿«ASCii BINary HEXadecimal OCTal»

Data Type for Status Messages

This command selects the data type of the response to queries for any CONDition, EVENt and ENABle register. This includes the IEEE 488.2 status register queries.

Parameters:

	ASCii	The data is transferred as ASCii bytes in NR1 format.
	HEXadecimal	The data is encoded as non-decimal numeric, base 16, pre-
		ceded by ‘#H’ as specified in IEEE 488.2
	OCTal	The data is encoded as non-decimal numeric base 8, pre-
		ceded by ‘#Q’ as specified in IEEE 488.2
	BINary	The data is encoded as non-decimal numeric, base 2, pre-
		ceded by ‘#B’ as specified in IEEE 488.2
Returned format: ASCii BINary HEXadecimal OCTal ￿
*RST condition: ASCii

Command Reference 9-39