Fluke PM6681R ARM COUNt, No. of Measurements on each Bus arm, Command Reference, MAX gives 65

:ARM :COUNt

￿«<Numeric value>MINMAX»

PM6680B/81/85

No. of Measurements on each Bus arm

This count variable controls the upward exit of the “wait-for-bus-arm” state (:ARM:STARt:LAY1). The counter loops the trigger subsystem downwards COUNt number of times before it exits to the idle state.

This means that a COUNt No. of measurements can be done for each Bus arming or INITiate.

￿ The actual number of measurements made on each INIT is equal to: (:ARM:START:COUNT)*(:TRIG:START:COUNT)

Parameters:

<Numeric value> is a number between 1 and 65 535. (1 switches the function OFF.) MIN gives 1

MAX gives 65 535

Returned format: <Numeric value>￿

Example:

SEND￿ :ARM:COUN￿100￿

*RST condition: 1

Complies to standards: SCPI 1991.0, confirmed

9-6 Command Reference